Configuration of Beacon Gateway

Table of Contents

How to configure a beacon gateway? We had a LUCI management platform in the gateway, once you connect the gateway and your PC with a same router, you can log in it.
We had a LUCI management platform in the gateway, once you connect the gateway and your PC with a same router, you can log in it. You can connect to the gateway by following three steps.

Connect to the gateway

1) Connect the gateway and your PC with one router, shown in figure 1.
DM 20220701113025 008
Figure 1. Connect the gateway and your PC with one router
2) Log into the router to check the gateway’s IP address. In my case, I use the program Advanced IP Scanner to help me find it. The IP address in red rectangle is my gateway’s IP address, shown in figure 2.
DM 20220701113025 009
Figure 2.
Open a web browser on PC, Input Gateway IP Address, in my case is; Enter the username and Password(default Username: root, Password: root),login to the gateway, the process is shown in figure 3.
DM 20220701113025 010
Figure 3
After you log in the gateway with the IP address, you can configure the gateway as you desire. According to your questions, we had following answers.

1. Configure WiFi connection

We have a management page for both ap and sta wifi connection, seen in the figure 4.
DM 20220701113025 011
Figure 4
Then you can set the gateway in both AP and sta mode. As for ap mode, the gateway acts like a router, the other devices can connect to it In sta mode, the gateway can connect to other router, shown in figure 5.
DM 20220701113025 012
Figure 5

2. Configure the Server address where the collected data is sent

It can also be set in our management page on web, seen in the figure 6.
DM 20220701113025 013
Figure 6
You can configure the MQTT broker as you desired, shown in figure 7.
DM 20220701113025 014
Figure 7

3. Scan the BLE beacon signal

In our web page, you can see the beacon lists which would be uploaded to the server, seen in the figure 8,
DM 20220701113025 015
Figure 8

4. Filter options for BLE beacon signals based on UUID, Name etc & Configure BLE Scan Interval/window

In the platform , you can do the filter and setting job as you desired, seen in figure 9

DM 20220701113025 016
Figure 9

5. Send Scanned BLE data to designated Server

The scanned BLE beacon list would be uploaded to the platform in a certain time gap according to the user’s setting, the data in the gateway is shown in figure 10.
DM 20220701113025 017
Figure 10
The data in back end of platform is shown in figure 11.
DM 20220701113025 018
Figure 11
Download this Document
Configuration of Beacon gateway

have questions?

Leave a Reply

Related Posts

DSGW 075 1

DSGW-075-tuya Specification

The tuya gateway is developed based on DSGW-070-1, it can be connected to tuya’s ZigBee device. You can control the devices via the gateway with tuya App or smart life App.

Apply For Our Document