Industry Edge Computer Gateway
Specification
Product Name: Industry Edge Computer Gateway
Model Name: DSGW-080

Model list
Ethernet
DSGW-080-3
DSGW-080-4
DSGW-080-5
DSGW-080-6
Model
Feature
Bluetooth 5.0
Zigbee 3.0
DSGW-080-1
DSGW-080-2
RS485
4G LTE Cat4
I/O Interface
Wi-Fi

1. Introduction
1.1 Purpose& Description
The DSGW-080 Industry Edge Computing Gateway provides uninterrupted Internet access for machines over ubiquitous 3G/4G wireless networks and multiple broadband services. With powerful edge computing capabilities, comprehensive security protection and wireless services.
DSGW-080 features powerful edge computing capabilities. It realizes data optimization, real-time response, agile connection and intelligent analysis on the IoT edge, significantly reduces the data flow between field sites and data center, and avoid bottlenecks of cloud-end computing.
1.2 Product Feature Summary
-
Supports 4G LTE CAT4 & CAT1
-
Built-in redundancies: dual SIM card, link backup, VRRP hot standby, ensuring uninterrupted -network communications
-
Powerful computing performance, providing high-performance processing resources for edge computing
-
Supports a variety of industrial real-time Ethernet protocols and field bus protocols, compatible with a wide range of industrial equipment
-
Supports Python development, for developing user custom applications
-
Supports industrial cloud platforms: Microsoft Azure, Amazon AWS
-
Easy for management and large-scale deployment, support SNMP protocol and Device Manager cloud platform for efficient remote central management
-
Fully industrial-grade design, ready for challenging conditions
-
Support multiple wires protocol: ZigBee3.0, Bluetooth5.2, Wi-Fi.
1.3 Hardware block diagram

2. Mechanical Requirement
2.1 Drawings


3. Specifications
Technical Specification
CPU
ARM Cortex-A7, 1.2GHZ
System
RAM
Indicator LEDs
Reset Button
Linux
-
Power LED normally on when powered on
-
Zigbee/BLE/Z-WAVE LED is flash when the signal come
-
Network LED is flash, When the gateway can access the Internet
-
Ethernet LED is flash, When the network port is plugged into the Internet cable
-
LTE Signal LED, It indicates the signal strength of LTE
The reset button is hole button, After pressing the reset button for more than 5 seconds, the Gateway will be restored to the factory settings.
1GB
Flash
8GB eMMC
Power
Input: DC 12-48V
2*10/100Mbps WAN/LAN port
Ethernet
SIM card Slot
2*Drawer card slot
Antenna
3*SMA,1*LTE, 2*2.4GHZ
RS232
Support
RS485
Support
Installation
DIN-rail, wall mounting
Protection Rating
IP30
Housing
Aluminum alloy
Storage Temperature
-40℃~85℃
Operating Temperature
-25℃~75℃
Ambient Humidity
5~95%
Performance Requirement
Wi-Fi Performance
-
IEEE wireless LAN standard:
IEEE802.11n; IEEE802.11g; IEEE 802.11b;IEEE802.11ac
-
Data Rate:
IEEE 802.11b Standard Mode:1,2,5.5,11Mbps
IEEE 802.11g Standard Mode:6,9,12,18,24,36,48,54 Mbps
IEEE 802.11n: MCS0~MCS7 @ HT20/ 2.4GHz band
MCS0~MCS9 @ HT40/ 5GHz band
IEEE 802.11ac: MCS0~MCS9 @ VHT80/ 5GHz band
-
Sensitivity:
HT40 MCS7: -70dBm@10% PER(MCS7) /2.4GHz band
HT20 MCS7: -71dBm@10% PER(MCS7) /2.4GHz band
VHT80 MCS9 : -60dBm@10% PER(MCS9) /5GHz band
HT40 MCS9 : -63dBm@10% PER(MCS9) /5GHz band
-
Transmit Power:
IEEE 802.11n: 16dBm @HT20/40 MCS7 /2.4GHz band
IEEE 802.11g: 16dBm @54MHz
IEEE 802.11b: 18dBm @11MHz
IEEE 802.11ac: 13dBm @HT80 MCS9 /5GHz band
IEEE 802.11ac: 16dBm @HT80 MCS0 /5GHz band
IEEE 802.11n: 14dBm @HT20/40 MCS7 /5GHz band
IEEE 802.11n: 16dBm @HT20/40 MCS0 /5GHz band
-
Wireless Security: WPA/WPA2, WEP, TKIP, and AES
-
Working mode : Bridge、Gateway、AP Client
-
Range: 50 meters minimum, open field
-
Transmit Power:17dBm
-
Highest Transmission Rate: 300Mbps
-
Frequency offset: +/- 50KHZ
-
Frequency Range (MHz): 2412.0~2483.5
-
Low Frequency (MHz):2400
-
High Frequency (MHz):2483.5
-
E.i.r.p (Equivalent Isotopically Radiated power) (mW)<100nW
-
Bandwidth (MHz):20MHz/40MHz
-
Modulation: BPSK/QPSK, FHSSCCK/DSSS, 64QAM/OFDM
Zigbee 3.0 Performance
-
Range: 100 meters minimum, open field
-
Transmit Power:17.5dBm
-
Highest Transmission Rate: 300Mbps
-
Frequency offset: +/- 20KHZ
-
Receiving Sensibility:-94dBm
-
Frequency Range (MHz):2401.0~2483.5
-
Low Frequency (MHz):2400
-
High Frequency (MHz):2483.5
-
E.i.r.p (Equivalent Isotopically Radiated power) (mW)<100mW
-
Bandwidth (MHz):5MHz
-
Modulation: OQPSK
Bluetooth Performance
-
Bluetooth Protocol: Bluetooth 5.0
-
TX Power: 19.5dBm
-
Range: 150 meters minimum, open filed
-
Receiving Sensibility: -80dBm@0.1%BER
-
Frequency offset: +/-20KHZ
LTE Cat4
-
LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/
-
B19/B20/B25/B26/B28
-
LTE-TDD: B38/B39/B40/B41
-
UMTS: B1/B2/B4/B5/B6/B8/B19
-
GSM: B2/B3/B5/B8
RF Factory Test Mode
-
Setting the Board into the test mode, using the Iqexl-ws that can test the Wi-Fi, Zigbee.
-
Please refer to the DUSUN Test Specification for details.
4. QA Requirements
4.1 Quality Information
Information Description
Standard(Yes) custom(No)
ESD Testing
RF Antenna Analysis
Environmental Testing
Reliability Testing
Certification
Yes
Yes
Yes
Yes
FCC,CE, Bluetooth certification, Zigbee certification, PTCRB
Quality &Testing Information