DSGW-097 MTK7628 ZigBee/BLE/Z-wave to Wi-Fi/Ethernet/Cellular Gateway Specification

DSGW-097 MTK7628 multi-protocol gateway can be installed on the ceiling. It's ZigBee/BLE/Z-wave to Wi-Fi/Ethernet/Cellular. Read further to know its model list, features, block diagram, mechanical design, hardware parameters and connectivity performance, and quality testing info.
Table of Contents

DSGW-097

DSGW 095 subg to wifi/ethernet gateway
Model list
ModelWi-Fi 2.4GBluetooth 5.2Zigbee3.0Enocean
DSGW-097-1
1. Introduction
1.1 Purpose& Description

The DSGW-097 is a ceiling gateway used in the smart home, intelligent security industry, pension services. It a central device, support multiple wireless protocols including Wi-Fi andzigbee3.0, BLE, Z-WAVE. The user can connect the network through Wi-Fi, Ethernet and Cellular network. Besides, smart sensors can be connected through zigbee3.0, BLE, Z-WAVE.

1.2 Product Feature Summary
  • OS: [email protected] OpenWrt
  • USB 5V type C Power supply and PoE Ethernet Power supply
  • Processor: MTK7628 (MIPS24KEc(580MHZ)
  • RAM: 128MB
  • Flash: 16MB
  • Support IEEE802.11n,IEEE802.11g,IEEE 802.11b Protocol
  • Support zigbee3.0 and thread
  • Support BLE5.2
  • Support LTE cat M1
  • One WAN/LAN variable network port
  • Support EnOcean, TCM310
1.3 Hardware block diagram
block diagram of MTK7628 ZigBee/BLE/Z-wave to Wi-Fi/Ethernet/Cellular Gateway
2. Mechanical Requirement
2.1 Drawings
mechanical drawings of subg to wifi/ethernet gateway
interface of MTK7628 ZigBee/BLE/Z-wave to Wi-Fi/Ethernet/Cellular Gateway
3. Specifications
3.1 Technical Specification
Power AdapterInput:100V~240V AC/50~60HZ Output:5V/2A, Micro USB
EthernetThe network interface supports CAT-5/CAT-5E to transmit data and POE Power Supply (voltage range is 44~ 57V). It is WAN/LAN variable.
Indicator LEDsPower LED normally on when powered on Zigbee/Z-WAVE LED is flash when the signal
come Wi-Fi LED normally on after connecting to Wi-Fi for 1-2 sec
Reset ButtonThe reset button is hole button, After pressing the reset button for more than 5 seconds, the Gateway will be restored to the factory settings
Operating Temperature-10℃~55℃
3.2 Performance Requirement
Wi-Fi Performance· IEEE wireless LAN standard:
· IEEE802.11n; IEEE802.11g; IEEE 802.11b
· Data Rate:
IEEE 802.11b Standard Mode:1,2,5.5,11Mbps
IEEE 802.11g Standard Mode:6,9,12,18,24,36,48,54 Mbps
IEEE 802.11n:MCS0~MCS7 @ HT20/ 2.4GHz band
· Sensitivity:
· HT40 MCS7 : [email protected]% PER(MCS7) /2.4GHz band
· HT20 MCS7 : [email protected]% PER(MCS7) /2.4GHz band
· Transmit Power:
IEEE 802.11n: 16dBm @HT20/40 MCS7 /2.4GHz band
IEEE 802.11g: 16dBm @54MHz
IEEE 802.11b: 18dBm @11MHz
· Wireless Security: WPA/WPA2, WEP, TKIP, and AES
· Working mode : Bridge、Gateway、AP Client
· Range: 50 meters minimum, open field
· Transmit Power:17dBm
· Highest Transmission Rate: 300Mbps
· Frequency offset: +/- 50KHZ
· Frequency Range (MHz): 2412.0~2483.5
· Low Frequency (MHz):2400
· High Frequency (MHz):2483.5
· E.i.r.p (Equivalent Isotopically Radiated power) (mW)<100mW
· Bandwidth (MHz):20MHz/40MHz
· Modulation: BPSK/QPSK, FHSSCCK/DSSS, 64QAM/OFDM
Zigbee3.0 Performance· TX Power: 19.5dBm
· Range: 100 meters minimum, open filed
· Receiving Sensibility:-94dBm
· Frequency offset: +/-20KHZ
Z-WAVE Performance· TX power: TX power up to 13dBm
· RX sensitivity: @100kbps -97.5dBm
· Range: 100 meters minimum, open filed
· Default Frequency: 916MHz( Different country with differentfrequency)
Bluetooth performance· Bluetooth Protocol: Bluetooth 5.2
· TX Power: 19.5dBm
· Range: 150 meters minimum, open filed
· Receiving Sensibility: [email protected]%BER
· Frequency offset: +/-20KHZ
· BLE dual role (peripheral role and central role)
LTE cat1· LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/ B26(Cat M1
Only)/B27(Cat M1 Only)/B28/B31/B66/ B71(Cat
· NB2 Only)/B72/B73/B85/B86*2 (Cat NB2 only)/B87*2 /B88*2
· EGPRS: 850/900/1800/1900MHz
Ethernet· 10/100Mbps
4. QA Requirements
4.1 Quality &Testing Information
Information DescriptionStandard (Yes) custom(No)
ESD TestingYES
RF Antenna AnalysisYES
Environmental TestingYES
Reliability TestingYES
CertificationFCC,CE ,IC, Z-wave plus, RoHs
Related IoT Product Specifications

RK3328 core board

The RK3328 core board belongs to the Android smart motherboard, which is generally suitable for face recognition, smart display terminal products, video terminal products, industrial

Smart Watch Product Specification

This product supports a location tracker, temperature monitor, and heart rate monitor. It can monitor your heart rate data at all times and your mood

Zigbee/matter/BLE Cloud Module

1 Introduction 1.1 Purpose& Description DSM-04B is a low power-consuming embedded Zigbee/matter/BLE module developed By Dusun. It consists of the highly integrated wireless radio processor

Looking For An IoT Device Supplier For Your Projects?

CONTACT US

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    CONTACT US

      This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

      Welcome to DusunIoT

      Hi there 👋 Is there anything we can help you with today? Please fill in the form below for the team to follow up if you become disconnected.

          This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.