Be A Dusun Distributor >>

Specification of the Waterproof Industrial Gateway

Table of Contents

Product Name: Waterproof Industrial Gateway
Model Name: DSGW-010

dsgw 010 new 1

Model List


1. Introduction

1.1 Purpose&Description

It’s a Bluetooth Gateway with POE or DC power supply. It can be used in various scenarios flexibly. It can control BLE device remotely, receives the data sent by the BLE devices and sends it to servers. The Wi-Fi data rate can be up to 580Mbps and the BLE data rate can be up to 2Mbps. It can also support the POE switch power supply and 12V adapter power supply, It reserves the ZigBee function and 4G LTE function

1.2 Product Feature Summary
  • Support the POE switch power supply and 12V adapter power supply
  • Support IEEE802.3-2012 Type 1, the IEEE802.3-2012 Type 1 requires a power supply device (PSE) to provide
    44 to 57V, and the power of the powered device(PD) must not exceed 12.95 W and the current does not
    exceed 350 mA
    Support IEEE802.11n,IEEE802.11g,IEEE 802.11b Protocol
  • Support Network Communication of 4G Module (LTE-TDD/LTE-FDD) ( option )
  • Support Bluetooth 5.2
  • Support ZigBee3.0 (option)
  • Support GPS, GLONASS, BeiDou/Compass, Galileo, QZSS (Option)
  • Supporting waterproof IP66
  • One WAN/LAN variable network port
  • RoHS compliance(Lead-free)
  • FCC,CE compliance
1.3 Hardware block diagram
dsgw 010 new 2

2. Mechanical Requirement

2.1 Drawings
dsgw 010 new 3
2.1 Drawings
dsgw 010 new 4

1. LED indicator
2. RJ45Interface(Network Interface and POE Power Supply Interface)
3. DC power
4. WIFI Antenna
5. LTE Antenna
6. BT Antenna, Zigbee Antenna, Z-wave Antenna, GPS Antenna(custom)

2.3 Dimension
dsgw 010 new 5

3. Electrical Requirements

3.1 Hardware Information

1. LED indicator
2. RJ45Interface(Network Interface and POE Power Supply Interface)
3. DC power
4. WIFI Antenna
5. LTE Antenna
6. BT Antenna, Zigbee Antenna, Z-wave Antenna, GPS Antenna(custom)

Power Supply PortSupport DC input, input Voltage range is 10V to12V.
The power seat aperture is 3.5mm.
The needle diameter is1.35 mm and is positive.
Power adapter:100-240V 50/60HZ,Output is 12V/2A
Reset buttonThe reset button inside the gateway, After pressing the reset button for more than 5 seconds, the Wi-Fi unit will be restored to the factory settings.
Network InterfaceThe network interface supports CAT-5/CAT-5E to transmit data and POE
Power Supply (voltage range is 44~ 57V). It is a WAN/LAN variable.
Indicator LEDs1). Power LED normally on when powered on
2). Network LED normally on when connected
3). Wi-Fi LED normally on after connecting to Wi-Fi for 1- 2 sec
Operating Temperature -20℃~70℃
Currents[email protected]
waterproof leveIP66
3.2 Performance Requirement
3.2.1 Wi-Fi Performance
  • IEEE wireless LAN standard:IEEE802.11n; IEEE802.11g; IEEE 802.11b
  • Data Rate: IEEE 802.11b Standard Mode:1,2,5.5,11Mbps
    IEEE 802.11g Standard Mode:6,9,12,18,24,36,48,54 Mbps
    IEEE 802.11n: MCS0~MCS7 @ HT20/ 2.4GHz band
    MCS0~MCS7 @ HT40/ 2.4GHz band
  • Sensitivity:HT40 MCS7 : [email protected]% PER(MCS7) /2.4GHz band
    HT20 MCS7 : [email protected]% PER(MCS7) /2.4GHz band
  • Transmit Power: IEEE 802.11n: 16dBm @HT20/40 MCS7 /2.4GHz band
    IEEE 802.11g: 16dBm @54MHz
    IEEE 802.11b: 18dBm @11MHz
  • Wireless Security: WPA/WPA2, WEP, TKIP, and AES
  • Working mode: Bridge、Gateway、AP Client
3.2.2 ZigBee Performance

TX Power: 17.5dBm
Range: 100 meters minimum, open filed
Receiving Sensibility:-94dBm
Frequency offset: +/-20KHZ

3.2.3 Bluetooth Performance

Bluetooth Protocol: Bluetooth5.2
TX Power: 19.5dBm
Range: 150 meters minimum, open filed
Receiving Sensibility: [email protected]%BER
Frequency offset: +/-20KHZ

3.2.4 LTE Performance

Operation Frequency Band: 850/ 900/ 1800/ 1900MHZ
GPRS Characteristic

GPRSGlobal: LTE FDD:B1/ B2/ B3/ B4/ B5/ B8/ B12/ B13/ B18/ B19/ B20/ B26/ B28
LTE TDD: B39 (for cat.M1 only)
Cat.M1/ Cat.NB1

Operator Certification:
Verizon/ AT&T/ T-Mobile/ Telus/ CE/ RCM/ FCC/ IC/ IFETEL/ CCC/ NCC/ KC/ JATE/ TELEC/ IMDA/ GCF/ PTCRB/ Vodafone/ Deutsche/ Telekom/ Telefonica/ SKT/ SoftBnak/ KDDI/ Telstra

3.2.5 GPS Performance

GPS/ Galileo/ QZSS: 1575.42±1.023 MHz
GLONASS : 1597.5~1605.8 MHz
BeiDou : 1561.098±2.046 MHz 

3.2.6 EthernetPerformance

WAN port: 10M/100 Mbps
LAN port: 10M/100 Mbps

4. QA Requirements

4.1 Quality Information
Quality &Testing Information
Information DescriptionStandard(Yes) custom(No)
ESD TestingYes
RF Antenna AnalysisYes
Environmental TestingYes
Reliability TestingYes
Bluetooth CertificationYes
Zigbee CertificationYes
Waterproof testYes
4.2 Operate temperature

For gateway, the Standard temperature operates is at -20℃~70℃.

5. Application

1) Bluetooth Gateway collects information about Beacon nearby, including RSSI, MAC, etc., once per second.

2) Bluetooth Gateway sends the Beacon information to Cloud via Wi-Fi or LTE once per second.

3) Bluetooth Gateway supports the TCP/IP, UDP protocol, and can support the MQTT, LWM2M protocol

4) GPS collects latitude and longitude information, send it to Cloud every 15 minutes(custom)

6. Application Scenarios

Application NOFunction IntroductionModel NameFirmware Version
AP-01WI-FI and Bluetooth ScannerDSGW-010-3DSGW-010-3-Vesion1.0
AP-02Work with Beacon for Indoor PositioningDSGW-010-3DSGW-010-3-Vesion2.0
AP-03Locate the shipDSGW-010-5DSGW-010-3-Vesion3.0
AP-04Work for mobile Industrial serverDSGW-010-5DSGW-010-3-Vesion3.0
6.1 AP-01 Monitor Shopping and Street Activity

The smart gateway can be used to detect iPhone and Android devices, which can be detected without the need of being connected to a specific Access Point, enabling the detection of any smartphone, laptop, or handsfree device which comes into the coverage area of this smart gateway and in general any device which works with Wi-Fi or Bluetooth interfaces. Users have to do nothing to be detected as the WIFI and Bluetooth radios are integrated into their smartphones

dsgw 010 new 6
534832012/4/24 7:56:25C4:2C:03:96:0E:4A69Apple
534822012/4/24 9:11:26D8:2A:7E:10:1E:63libelium_wsn160Nokia Corporation

Example of information monitored by the WIFI Scanner

454002012/5/16 16:18:1200:26:7E:5F:3C:18myCar-72HandsfreePARROT SA
780052012/4/20 12:59:27D8:2A:7E:0E:C3:10Tropic-85SmartphoneNokia Corporation

Example of information monitored by the Bluetooth Scanner

6.2 AP-02 Beacons for Indoor guidance and location
dsgw 010 new 7

Exemplary deployment of a beacon infrastructure

The beacon attached to the asset to be tracked sends BLE signals to Smart Gateway that are installed in the building. The Gateway processes the provided data and sends it via Wi-Fi, Ethernet to Server. Here, the position is displayed on a map, and motion statistics can be retrieved.

6.3 AP-03 Locate the ship
dsgw 010 new 8

Working Scenario

The smart gateway can be used as a transmitter to connect various communication equipment on the ship and transmit signals to the monitoring center by the LTE. At the same time, the gateway can be connected to the camera or voice device, and the image can be encoded and transmitted back to the ground satellite fixed station through a variety of communication means. As a router, it is convenient for the crew to connect computers, mobile phones, etc., and access the Internet through the ground satellite master station to realize network surfing.

6.4 AP-04 Intelligent gateway Construction site management system
dsgw 010 new 9

Wisdom site

As the central control gateway of the construction site, the monitoring information of various sensors in the construction site can be collected through Bluetooth, ZigBee, and Ethernet to realize real-time remote monitoring of the construction site. At the same time for the site of computers, printers to provide network access, convenient supervisor office.

7. Installation

dsgw 010 new 10

8. Packing List

Network Cable1
Clamping Fixture1

9. Certification

dsgw 010 new 11
dsgw 010 new 12

Looking For An IoT Device Supplier For Your Projects?


    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.