Specification of the Waterproof Industrial Gateway

Table of Contents

010C 1

Product Name: Waterproof Industrial gateway

Model Name: DSGW-010

Model List

Feature Wi-Fi 2.4G Wi-Fi 5G Bluetooth 5.2 ZigBee3.0 LTE CatM1 POE GPS
DSGW-010-1      
DSGW-010-2      
DSGW-010-3      
DSGW-010-4      
DSGW-010-5      

1. Introduction

1.1 Purpose& Description

It’s a Bluetooth Gateway with POE or DC power supply. It can be used in various scenarios flexibly. It can control BLE device remotely, receives the data sent by the BLE devices, and sends it to servers. The Wi-Fi data rate can be up to 580Mbps and the BLE data rate can be up to 2Mbps. It can also support the POE switch power supply and 5V adapter power supply, It reserves the ZigBee function and 4G LTE function.   

1.2 Product Feature Summary 

  • Support the POE switch power supply and 5V adapter power supply
  • Support IEEE802.3-2012 Type 1, the IEEE802.3-2012 Type 1 requires a power supply device (PSE) to provide 44 to 57V, and the power of the powered device (PD) must not exceed 12.95 W and the current does not exceed 350 mA.
  • Support IEEE802.11n,IEEE802.11g,IEEE 802.11b Protocol;
  • Support Network Communication of 4G Module (LTE-TDD/LTE-FDD) (option)  ;
  • Support Bluetooth 5.2;
  • Support ZigBee3.0 (option)
  • Support GPS, GLONASS, BeiDou/Compass, Galileo, QZSS (option)
  • Supporting waterproof and dustproof;
  • One WAN/LAN variable network port
  • RoHS compliance(Lead-free)
  • FCC,CE compliance

1.3 Hardware block diagram

hardblock.png

2. Mechanical Requirement

2.1 Drawings 

010C 3

3. Electrical Requirements

3.1 Hardware Information  

Category Specifications
Power Supply Port Support DC input , input Voltage range is 4.5V to 5V. Power seat aperture is 3.5mm. The needle diameter is1.35 mm and is positive. Power adapter:100-240V 50/60HZ, Output is 5V/2A
Reset button The reset button inside gateway, After pressing the reset button for more than 5 seconds, the Wi-Fi unit will be restored to the factory settings.
Network Interface The network interface supports CAT-5/CAT-5E to transmit data and POE Power Supply (voltage range is 44~ 57V). It is WAN/LAN variable.
Indicator LEDs 1).Power LED normally on when powered on 2).Network LED normally on when connected 3).Wi-Fi LED normally on after connecting to Wi-Fi for 1-2 sec
Operating Temperature -20℃~70℃
Currents [email protected]
Waterproof level IP65

3.2 Performance Requirement 

3.2.1 Wi-Fi Performance 

IEEE wireless LAN standard:

  • IEEE802.11n
  • IEEE802.11g
  • IEEE 802.11b

Data Rate: 

  • IEEE 802.11b Standard Mode:1,2,5.5,11Mbps               
  • IEEE 802.11g Standard Mode:6,9,12,18,24,36,48,54 Mbps             
  • IEEE 802.11n:  MCS0~MCS7 @ HT20/ 2.4GHz band
  • MCS0~MCS7 @ HT40/ 2.4GHz band

Sensitivity: 

Transmit Power: 

  • IEEE 802.11n: 16dBm @HT20/40 MCS7 /2.4GHz band
  • IEEE 802.11g: 16dBm @54MHz
  • IEEE 802.11b: 18dBm @11MHz

Wireless Security: 

WPA/WPA2, WEP, TKIP, and AES

Working mode: Bridge、Gateway、AP Client

3.2.2 ZigBee Performance

  • TX Power: 17.5dBm
  • Range: 100 meters minimum, open filed
  • Receiving Sensibility:-94dBm
  • Frequency offset: +/-20KHZ

3.2.3 Bluetooth Performance

  • Bluetooth Protocol: Bluetooth 5.2
  • TX Power: 19.5dBm
  • Range: 150 meters minimum, open filed
  • Receiving Sensibility: [email protected]%BER
  • Frequency offset: +/-20KHZ

3.2.4 LTE Performance

Operation Frequency Band: 850/900/1800/1900MHZ

GPRS Characteristic

GPRS Global: LTE FDD:B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28
North America: LTE TDD:B2/B4/B12/B13
LTE TDD:B39(for cat.M1 only)
EGPRS
Cat.M1/Cat.NB1

Operator Certification:

Verizon/AT&T/T-Mobile/Telus/CE/RCM/FCC/IC/IFETEL/CCC/NCC/KC/JATE/TELEC/

IMDA/GCF/PTCRB/Vodafone/Deutsche/Telekom/Telefonica/SKT/SoftBnak/KDDI/Telstra 

3.2.5 Ethernet Performance

  • WAN port:10M/100M bps
  • LAN port:  10M/100M bps

4. QA Requirements

4.1 Quality Information

Quality &Testing Information

Information Description Standard(Yes) custom(No)
ESD Testing Yes
RF Antenna Analysis Yes
Environmental Testing Yes
Reliability Testing Yes
Bluetooth Certification Yes
zigbee Certification Yes

4.2 Operate temperature

For gateway, the standard temperature operating is -20℃~70℃. 

5. Application 

  1. Bluetooth Gateway collects information about Beacon nearby, including RSSI, MAC, etc., once per second.
  2. Bluetooth Gateway sends the Beacon information to Cloud via Wi-Fi or LTE once per second.
  3. Bluetooth Gateway supports the TCP/IP, and UDP protocol, and can support the MQTT, LWM2M protocol .

Need More Information?

Still have questions?

Leave a Reply

Related Posts

DSGW 075 1

DSGW-075-tuya Specification

The tuya gateway is developed based on DSGW-070-1, it can be connected to tuya’s ZigBee device. You can control the devices via the gateway with tuya App or smart life App.

    Apply For Our Document