Wi-Fi module product specification

DSM-010 is a low power consumption module with built-in Wi-Fi connectivity solution. The Wi-Fi module consist a highly integrated wireless radio chip ESP8285 which has been programed with Wi-Fi network protocol and plenty of software examples.
Table of Contents

Product Name: Wi-Fi Module

Model Name: DSM-010

1. Introduction

1.1 Purpose& Description

DSM-010 is a low power consumption module with built-in Wi-Fi connectivity solution. The Wi-Fi module consist a highly integrated wireless radio chip ESP8285 which has been programed with Wi-Fi network protocol and plenty of software examples. DSM-010 is a RTOS platform, embedded with all the Wi-Fi MAC and TCP/IP protocol function examples, users can customize their Wi-Fi product by using these software examples.

1.2 Product Feature Summary

  • Integrated low power consumption 32-bit CPU, also known as application processor
  • Support identification the AP based on the WIFI probe technology
  • Basic frequency can support both 80MHz and 160MHz
  • Supply voltage range: 3V to 3.6V Peripherals: 5× GPIOs, 1× UART , 1× ADC
  • Wi-Fi connectivity: 802.11 b/g/n

Channel 1 to 14 @ 2.4GHz

Support WPA/WPA2

+20dBm output power in 802.11b mode

Support STA/AP/STA+AP operation mode

Support Smart Link function for both Android and iOS devices

Standby power consumption is less than 0.1 mW (DTIM3)

On-board PCB antenna, or IPEX connector for external antenna

CE, FCC certified

Operating temperature range: -20℃ to 85℃

1.3 Main Application Fields

  • Intelligent Building Intelligent home
  • Intelligent household applications
  • Health care
  • Industrial wireless control
  • Baby monitor Webcam
  • Intelligent bus

2. Mechanical Design

2.1 Module Dimensions

DSM-010 has 2 columns of Pins (2* 9).The distance between each Pin is 2mm.

Size: 3 mm(W)* 15mm(L) * 17.3mm(H)

Wi Fi module 1
Pin Number Symbol I/O type Function
1 3V3 P Module Power Pin(3.3V)
2 05 I/O GPIO_05
3 GND P Power Reference Ground
4 04 I/O GPIO_04
5 RX I/O UART0_RXD(2)
6 13 I/O GPIO_13
7 TX I/O UART0_TXD(2)
8 AD AI ADC port, 10-bit precision SAR ADC
9 12 I/O GPIO_12
10 RST I/O Hardware reset pin (low level effective,internal pull-up resistance)
11 14 I/O GPIO_14

2.2 PCB Packaging

Wi Fi module 2
Wi Fi module 3

3. Electrical Characteristics

3.1 Absolute Electrical Characteristics

Parameters Description Minimum Value Maximum Value Unit
Ts Storage temperature -20 85
VCC Power supply voltage -0.3 3.6 V
Static electricity voltage (human model) TAMB-25℃ - 2 KV
Static electricity voltage (human model) TAMB-25℃ - 0.5 KV

3.2 Electrical conditions

Parameters Description Min Type Max Unit
Ta Working temperature -20 - 85
VCC Working voltage 3.0 3.3 3.6 V
VIL I/O low-level input -0.3 - VCC*0.25 V
VIH I/O high-level input VCC*0.75 - VCC V
VOL I/O low-level output - - VCC*0.1 V
VOH I/O high-level output VCC*0.8 - VCC V
Imax I/O drive current - - 12 mA

3.3 Wi-Fi TX Power Consumption

Parameter Mode Rate Tx power Typ Unit
IRF 11b 11 Mbit/s +17 dBm 220 mA
IRF 11g 54 Mbit/s +15 dBm 110 mA
IRF 11n MCS7 +13 dBm 100 mA

3.4 Wi-Fi RX Power Consumption

Parameter Mode Rate Typ Unit
IRF 11b 11 Mbit/s 76 mA
IRF 11g 54 Mbit/s 76 mA
IRF 11n MCS7 76 mA

3.5 Power Consumption in Operating Mode

Working Mode Working Status(Ta=25°C) Value Max Unit
EZ mode The module is in EZ status and the Wi-Fi indicator quickly flashes. 80 151 mA
AP mode The module is in AP status and the Wi-Fi indicator slowly flashes. 90 451 mA
Operation mode The module is in connected status and the Wi-Fi indicator is steady on. 58.5 411 mA
Disconnection mode The module is in disconnected status and the聽Wi-Fi indicator is steady off. 80 430 mA

4. RF Features

4.1 Basic RF Features

Parameter Description
Frequency band 2.412–2.484 GHz
Wi-Fi standard IEEE 802.11b/g/n (channel 1–14)
Data transmitting rate 11b: 1, 2, 5.5, 11 (Mbit/s)11g: 6, 9, 12, 18, 24, 36, 48, 54 (Mbit/s)11n: HT20 MCS0–MCS7
Antenna type PCB antenna

4.2 Wi-Fi Output Power

Parameter Min Typ Max Unit
RF average output power, 802.11b CCK mode 1M - 20 - dBm
RF average output power, 802.11g OFDM mode 54M - 17 - dBm
RF average output power, 802.11n OFDM mode MCS7 - 14 - dBm
Frequency error -10 20 10 ppm

4.3 RF RX sensitivity

Parameter Min Typ Max Unit
PER < 8%, RX sensitivity, 802.11b CCK mode 1M - -91 - dBm
PER < 10%, RX sensitivity, 802.11g OFDM mode 54M - -75 - dBm
PER < 10%, RX sensitivity, 802.11n OFDM mode MCS7 - -72 - dBm

5. Production Guide

The storage conditions for the module after it has been shipped are as follows:

  1. The moisture resistant bag must be stored at a temperature below 30℃, and under a relative humidity below 85%.
  2. The shelf life of dry packed products is 6 months following the packaged date important information.
  3. All line workers must wear anti-static wrist straps and anti-static clothing throughout the entire production process.
  4. It is strictly prohibited to allow a module to come into contact with water or other contaminants during operations.
Recommended Oven Temperature Profile
Wi Fi module 4 1

6. Package

Product type MOQ Packing method Number of Modules in Each Reel Pack Number of Reel Packs in Each Box
DSM-010 4000 Carrier tape and reel packing 800 5

7. Firmware for different devices

There are different firmware corresponding to different wireless device applications.
Wireless Devices Firmware version
Lighting DSM-010_Lighting.bin
Dimmer DSM-010_Dimmer.bin
Breaker DSM-010_breaker.bin
Switches DSM-010_Switch.bin
Plug DSM-010-Plug.bin
Strip DSM-010-Strip.bin
Smart Lock DSM-010-Lock.bin
Wi-Fi Probe DSM-010-Probe.bin

8. How to connect cloud platform

8.1 Wi-Fi Connection

In the first time of power on the devices, it would be set in ap mode and you can connect your pc/mobile phone to its wifi signal. It would be like Dusun_******, where the ****** are the last 6 bits of the devices’s MAC address. For example, the one in my test is Dusun_807F69

Wi Fi module 5

Then type in the ip 192.168.4.1 to log in the devices’s wifi, fill in the SSID and password of your router, then press Save button. Your devices would connect to your router automatically.

Wi Fi module 6

8.2 MQTT configuration

Configure MQTT credentials of your server as listed.

Wi Fi module 7
Related MQTT API for different devices.
API Document
Lighting MQTT API for Lighting
Dimmer MQTT API for Dimmer
Breaker MQTT API for Breaker
Switches MQTT API for Switches
Plug MQTT API for Plug
Strip MQTT API for strip
Smart Lock MQTT API for Lock
Wi-Fi Probe MQTT API for Wi-Fi probe
Related IoT Product Specifications

DSGW-023 4G LTE SIM Card Gateway

DSGW-023 4G LTE SIM Card Gateway with Wi-Fi Option has a SIM card plug-and-play setting. And allow running Tuya Smartlife APP on it. Read further

DSM-05D EFR32BG21 Bluetooth/BLE Module

Dusun IoT offers embedded low-power BLE module consisting of the highly integrated wireless radio processor chip, EFR32BG21A020F768IM32-B, and with a built-in BLE protocol stack and

Looking For An IoT Device Supplier For Your Projects?

CONTACT US

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    IoT Gateways for Recommendation

    CONTACT US

      This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

      Welcome to DusunIoT

      Hi there 👋 Is there anything we can help you with today? Please fill in the form below for the team to follow up if you become disconnected.

        DusunIoT Distributor Program

          This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

            This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.