DSGW-094 Bluetooth LTE Cat M1/Cat NB Gateway

DSGW-094 Bluetooth LTE gateway supports Bluetooth 5.2 and LTE Cat M1/Cat NB for reliable connectivity for a wide range of wireless IoT devices. Read further to know its features, block diagram, mechanical design, technical specification, and connectivity performance as well as quality testing info.
Table of Contents

DSGW-094 Bluetooth LTE Gateway (BLE/Bluetooth 5.2, LTE CatM1)

BLE LTE gateway
Mode LTE CatM1 Bluetooth5.2
DSGW-094-1

DSGW-094 Bluetooth LTE Gateway Introduction

DSGW-094 is a Bluetooth gateway supports Bluetooth 5.2 and LTE CatM1. It provides reliable connectivity for a wide range of wireless IoT devices. Users can connect BLE devices to the Internet through this Bluetooth LTE Gateway. Suitable for asset tracking, automotive tire pressure monitoring, remote patient monitoring, and Industrial Internet of Things.

Bluetooth LTE Gateway Feature Summary

  • USB 5V type C Power supply
  • Processor: nRF52840
  • Support Bluetooth 5.2
  • Support LTE cat M1/cat NB

DSGW-094 Bluetooth LTE Gateway Hardware Block Diagram

block diagram of BLE LTE gateway

DSGW-094 Bluetooth LTE Gateway Mechanical Requirement

Bluetooth LTE Gateway Drawings
mechanical drawings of BLE LTE gateway
dsgw-094 bluetooth lte gateway
bottom of BLE LTE gateway

DSGW-094 Bluetooth LTE Gateway Specifications

DSGW-094 Bluetooth LTE Gateway Technical Specification

Power Adapter Input:100V~240V AC/50~60HZ Output:5V/1A, USB type C
Indicator LEDs Green led: Power LED normally on when powered on
Red led: BLE LED is flash when the signal come
Blue led: LTE LED normally on after connected 1-2 sec
Reset Button The reset button is hole button, soft reset. After pressing the reset
button for more than 5 seconds, the Gateway will be restored to
the factory settings.
Installation method Flat, Ceiling, DIN
SIM card e-SIM /micro SIM Optional
Operating Temperature -0℃~55℃
Storage Temperature -40℃~85℃

DSGW-094 Bluetooth LTE Gateway Performance Requirement

BLE Performance
(NRF52840)
· TX Power: 8dBm
· Range: 100 meters minimum, open filed
· Receiving Sensitivity:
-103dBm at 125kbs,
-99dBm at 500kbs,
-96dBm at 1Mbs,
-92dBm at 2Mbs
· Frequency offset: +/-20KHZ
· Frequency Range (MHz):2400.0~2483.5
· Low Frequency (MHz):2400
· High Frequency (MHz):2483.5
LTE Cat M1
Performance
· Operation Frequency Band: 850/900/1800/1900MHZ
· Global:LTE:FDD:B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28
· North America: LTE TDD:B2/B4/B12/B13
· LTE TDD:B39(for cat.M1 only)

DSGW-094 Bluetooth LTE Gateway Quality Assurance Requirements

Bluetooth LTE Gateway Quality &Testing Information
Information Description Standard (Yes) custom(No)
ESD Testing YES
RF Antenna Analysis YES
Environmental Testing YES
Reliability Testing YES
Certification FCC, CE , IC
Related IoT Product Specifications

DSGW-210N Edge Computing Smart Gateway

The DSGW-210N is an IoT gateway with multiple protocols and edge computing functionality. It supports Total Control powerful tool for projecting the screen of multiple

Dusun Pi3 Model C

DSGW-014 is a full 8-channle outdoor Gateway, based on the LoRaWAN protocol, with built-in Ethernet connectivity for a straightforward setup.

Looking For An IoT Device Supplier For Your Projects?

CONTACT US

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    IoT Gateways for Recommendation

    CONTACT US

      This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

      Welcome to DusunIoT

      Hi there 👋 Is there anything we can help you with today? Please fill in the form below for the team to follow up if you become disconnected.

        DusunIoT Distributor Program

          This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

            This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.