EnOcean Gateway Introduction
DSGW-210E is an EnOcean gateway, and provides reliable connectivity for a wide range of EnOcean IoT devices.
Meanwhile, it works with Home Assistant. Once started, Home Assistant will automatically scan your network for known devices and allow you to easily set them up.
EnOcean Gateway Feature Summary
- Support 5V USB type-c power supply
- Support EnOcean, TM310
- One WAN/LAN variable network port
- RGBs indicator ring
- Support USB2.0
- Support backup Li battery , last 12 hours
- Support LTE cat1/LTE catM1
- Support BLE 5.0
- Support Matter
EnOcean Gateway Hardware Block Diagram
EnOcean Gateway Mechanical Requirement
Drawings
EnOcean Gateway Specifications
EnOcean Gateway Technical Specification
| Category | Specifications |
|---|---|
| Power Supply | USB type-C 5V/3A |
| Reset button | The reset button is hole button, After pressing the reset button for more than 5 seconds, the Locator will be restored to the factory settings. |
| Button | Software custom button |
| Network Interface | RJ45 |
| USB | USB2.0 |
| SD card | Up to 128GB SD card |
| Indicator LEDs | RGB indicator ring |
| Li battery | 6000mAh (last 12 hours) |
| Wireless protocol | EnOcean |
| Antenna | External antenna (SMA connector) |
| Installation method | Flat,Ceiling,DIN |
| RTC | Real Time Clock operated from on board battery |
| Operating Temperature | -10℃~60℃ |
| Storage Temperature | -40℃~85℃ |
| Operating humidity | 10%~90% |
| IP rating | IP22 |
| Cooling | Heat dissipation silicone/aluminum |
| Current | [email protected] |
EnOcean Gateway Performance Requirement
| CPU | Quad-core Cortex A53 |
| RAM | 1GB |
| eMMC | 8GB |
| EnOcean | • Radio frequency: • 868 MHz for Europe and other countries adopting RED • 902 MHz for USA (FCC specification) and Canada (IC specification) • EnOcean interface: TCM 310 • Transmit power: 3dBm maximum • Receive sensitivity: -97 dBm |
| Bluetooth | • TX Power: 6dBm • Range: 150 meters minimum, open filed • Receiving Sensibility: [email protected]%BER • Frequency offset: +/-20KHZ • Frequency Range (MHz):2401.0~2483.5 • Low Frequency (MHz):2400 • High Frequency (MHz):2483.5 • E.i.r.p (Equivalent Isotopically Radiated power) (mW)<10mW • Bandwidth (MHz):2MHz • Modulation: GFSK |
| Matter | • TX Power: 17.5dBm • Range: 100 meters minimum, open filed • Receiving Sensibility:-94dBm • Frequency offset: +/-20KHZ • Frequency Range (MHz):2401.0~2483.5 • Low Frequency (MHz):2400 • High Frequency (MHz):2483.5 • E.i.r.p (Equivalent Isotopically Radiated power) (mW)<100mW • Bandwidth (MHz):5MHz • Modulation: OQPSK |
| LTE Cat M1 | • Operation Frequency Band: 850/900/1800/1900MHZ |
| • Global:LTE:FDD:B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28 • North America: LTE TDD:B2/B4/B12/B13 • LTE TDD:B39(for cat.M1 only) | |
| LTE Cat1 | • LTE FDD: B2/B4/B5/B12/B13 • WCDMA:B2/B4/B5 • LTE FDD Data rate:10(DL)/5(DL) |
| WAN/LAN • 1 | • 10/100M bps |
EnOcean Gateway Software Requirement
| System | Home Assistant |
| Add-on | EnOcean |
EnOcean Gateway QA Requirements
Quality and Testing Information
| Information Description | Standard(Yes) custom(No) |
|---|---|
| ESD Testing | Yes |
| RF Antenna Analysis | Yes |
| Environmental Testing | Yes |
| Reliability Testing | Yes |
| Certification | FCC, CE, RoHs |
