DSGW-093 Wireless IoT PoE Gateway Linux OS

DSGW-093 wireless IoT gateway uses Linux operation system and supports multiple wireless protocols (BLE/ZigBee/Z-Wave to Ethernet/Wi-Fi/LTE). Read further to know its model list, feature summary, block diagram, mechanica design, hardware parameters and connectivity performance.
Table of Contents

DSGW-093

BLE LTE gateway

Model List of DSGW-093 Wireless IoT Gateway Linux OS

Mode Ethernet Bluetooth5.2 Zigbee3.0 Z-Wave Wifi LTE-Cat 1 Tuya zigbee
DSGW-093-1
DSGW-093-2

1. Introduction of DSGW-093 Wireless IoT Gateway Linux OS

DSGW-093 is a IoT Linux Gateway that with multiple wireless protocol. It provides reliable connectivity for a wide range of wireless IoT devices. The gateway’s modular architecture provides the ability to customize many gateway features providing an off-the-shelf solution that meets your exact needs. Wireless protocol option including Bluetooth, Wi-Fi, Ethernet, USB, ZigBee, Z-wave.

Product Feature Summary

  • OS: Linux
  • USB 5V type C Power supply and PoE Power supply
  • Processor: Quad-core Cortex-A35 up to 1.3GHz
  • RAM: 512MB
  • eMMC:4GB
  • Support IEEE802.11n, IEEE802.11g, IEEE 802.11b, IEEE 802.11ac Protocol
  • Support Z-WAVE
  • Support Zigbee3.0
  • Support Bluetooth 5.2
  • One WAN/LAN variable network port

Hardware block diagram

block diagram of dsgw-093 Wireless Gateway Linux OS

Mechanical Requirement of DSGW-093 Wireless IoT Gateway Linux OS

2.1 Drawings
mechanical drawings of BLE LTE gateway
dsgw-094 bluetooth lte gateway
bottom of dsgw-093 Wireless Gateway Linux OS

Specifications of DSGW-093 Wireless IoT Gateway Linux OS

3.1 Technical Specification

Power Adapter Input:100V~240V AC/50~60HZ Output:5V/3A, USB type C
Ethernet The network interface supports CAT-5/CAT-5E to transmit data and POE
Power Supply (voltage range is 44~ 57V). It is WAN/LAN variable.
Indicator LEDs Power LED normally on when powered on
Zigbee/Z-WAVE LED is flash when the signal come WAN LED normally on
after connect for 1-2 sec
Reset Button The reset button is hole button, After pressing the reset button for more than
5 seconds, the Gateway will be restored to the factory settings.
Installation method Flat, Ceiling, DIN
RTC Real Time Clock operated from on board battery
Operating Temperature 0℃~55℃
Storage Temperature -40℃~85℃
Cooling Heat dissipation silicone/aluminum

3.2 Performance Requirement

Zigbee3.0
Performance(Tuya zigbee)
· TX Power: 19.5dBm
· Range: 100 meters minimum, open filed
· Receiving Sensibility:-94dBm
· Frequency offset: +/-20KHZ
BLE Performance · TX Power: 19.5dBm
· Range: 150 meters minimum, open filed
· Receiving Sensibility: [email protected]%BER
· Frequency offset: +/-20KHZ
· Frequency Range (MHz):2401.0~2483.5
· Low Frequency (MHz):2400
· High Frequency (MHz):2483.5
· E.i.r.p (Equivalent Isotopically Radiated power)(mW)<10mW
· Bandwidth (MHz):2MHz
· Modulation: GFSK
Z-WAVE Performance · TX power: TX power up to 13dBm
· RX sensitivity: @100kbps -97.5dBm
· Range: 100 meters minimum, open filed
· Default Frequency: 916MHz( Different country with differentfrequency)
Wi-Fi Performance · IEEE wireless LAN standard:
IEEE802.11ac; IEEE 802.11a; IEEE802.11n; IEEE802.11g; IEEE 802.11b
· Data Rate:
IEEE 802.11b Standard Mode:1,2,5.5,11Mbps
IEEE 802.11g Standard Mode:6,9,12,18,24,36,48,54 Mbps
IEEE 802.11n:
MCS0~MCS7 @ HT20/ 2.4GHz band
MCS0~MCS7 @ HT40/ 2.4GHz band
MCS0~MCS9 @ HT40/ 5GHz band
IEEE 802.11ac:
MCS0~MCS9 @ VHT80/ 5GHzband
· Sensitivity:
VHT80 MCS9 : -60dBm@10% PER(MCS9) /5GHz band
HT40 MCS9 :-63dBm@10% PER(MCS9) /5GHz band
HT40 MCS7 : -70dBm@10% PER(MCS7) /2.4GHz band
HT20 MCS7 : -71dBm@10% PER(MCS7)/2.4GHz band
· Transmit Power:
IEEE 802.11ac: 13dBm @HT80 MCS9 /5GHz band
IEEE 802.11ac: 16dBm @HT80 MCS0 /5GHz band
IEEE 802.11n:14dBm @HT20/40 MCS7 /5GHz band
IEEE 802.11n: 16dBm @HT20/40 MCS0 /5GHz band
IEEE 802.11n: 16dBm @HT20/40 MCS7 /2.4GHz band
IEEE 802.11g: 16dBm @54MHz
IEEE 802.11b: 18dBm @11MHz
· WirelessSecurity: WPA/WPA2, WEP, TKIP, and AES
· Working mode : Bridge、Gateway、AP Client
· Range: 50 meters minimum, open field
· Transmit Power:17dBm
· Highest Transmission Rate:300Mbps
· Frequency offset: +/-50KHZ
· Frequency Range (MHz): 2412.0~2483.5
· Low Frequency (MHz):2400
· High Frequency (MHz):2483.5
· E.i.r.p (Equivalent Isotopically Radiated power) (mW)<100mW
· Bandwidth (MHz):20MHz/40MHz
· Modulation: BPSK/QPSK, FHSSCCK/DSSS,64QAM/OFDM IEEE wireless LAN standard:
IEEE802.11ac; IEEE 802.11a; IEEE802.11n; IEEE802.11g; IEEE 802.11b
· Data Rate:
IEEE 802.11b Standard Mode:1,2,5.5,11Mbps
IEEE 802.11g Standard Mode:6,9,12,18,24,36,48,54 Mbps
IEEE 802.11n:
MCS0~MCS7 @ HT20/ 2.4GHz band
MCS0~MCS7 @ HT40/ 2.4GHz band
MCS0~MCS9 @ HT40/ 5GHz band
IEEE 802.11ac:
MCS0~MCS9 @ VHT80/ 5GHzband
· Sensitivity:
VHT80 MCS9 : -60dBm@10% PER(MCS9) /5GHz band
HT40 MCS9 :-63dBm@10% PER(MCS9) /5GHz band
HT40 MCS7 : -70dBm@10% PER(MCS7) /2.4GHz band
HT20 MCS7 : -71dBm@10% PER(MCS7)/2.4GHz band
· Transmit Power:
IEEE 802.11ac: 13dBm @HT80 MCS9 /5GHz band
IEEE 802.11ac: 16dBm @HT80 MCS0 /5GHz band
IEEE 802.11n:14dBm @HT20/40 MCS7 /5GHz band
IEEE 802.11n: 16dBm @HT20/40 MCS0 /5GHz band
IEEE 802.11n: 16dBm @HT20/40 MCS7 /2.4GHz band
IEEE 802.11g: 16dBm @54MHz
IEEE 802.11b: 18dBm @11MHz
· WirelessSecurity: WPA/WPA2, WEP, TKIP, and AES
· Working mode : Bridge、Gateway、AP Client
· Range: 50 meters minimum, open field
· Transmit Power:17dBm
· Highest Transmission Rate:300Mbps
· Frequency offset: +/-50KHZ
· Frequency Range (MHz): 2412.0~2483.5
· Low Frequency (MHz):2400
· High Frequency (MHz):2483.5
· E.i.r.p (Equivalent Isotopically Radiated power) (mW)<100mW
· Bandwidth (MHz):20MHz/40MHz
· Modulation: BPSK/QPSK, FHSSCCK/DSSS,64QAM/OFDM
Ethernet · 10/100M
LTE cat 1 · -E ( Europe ) LTE-FDD: B1/B3/B7/B8/B20/B28A; WCDMA: B1/B8; GSM: B3/B8
· -EX ( Europe ) LTE-FDD: B1/B3/B7/B8/B20/B28; WCDMA: B1/B8; GSM: B3/B8
· -NAXD ( North America ) LTE-FDD: B2/B4/B5/B12/B13/B25/B26; WCDMA:B2/B4/B5
· -NA ( North America ) LTE-FDD: B2/B4/B5/B12/B13 ; WCDMA: B2/B4/B5
· -NAX ( North America ) LTE-FDD: B2/B4/B5/B12/B13/B25/B26 ; WCDMA: B2/B4/B5
· -VX (Verizon) LTE-FDD: B4/B13
· -AUX ( Latin america /ANZ) LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28/B66;
· WCDMA: B1/B2/B5/B8; GSM: B2/B3/B5/B8

QA Requirements of DSGW-093 Wireless IoT Gateway Linux OS

4.1 Quality &Testing Information
Information Description Standard (Yes) custom(No)
ESD Testing YES
RF Antenna Analysis YES
Environmental Testing YES
Reliability Testing YES
Certification FCC,CE ,IC, BQB,Z-wave plus, RoHs
Related IoT Product Specifications

DSOM-020 PX30 System on Module (SoM)

DSOM-020 PX30 System on Module/Core Board adopts the PX30 processor, which is a ARM Cortex A-53, quad core. It can be paired with multiple types

MIR-IR100 PIR Motion Sensor Spec

1. PIR Sensor Product Description 1.1. Purpose and Description The MIR-IR100 PIR Motion Sensor utilizes Fresnel lens to focus on the infrared light emitted by

Looking For An IoT Device Supplier For Your Projects?

CONTACT US

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    IoT Gateways for Recommendation

    CONTACT US

      This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

      Welcome to DusunIoT

      Hi there 👋 Is there anything we can help you with today? Please fill in the form below for the team to follow up if you become disconnected.

        DusunIoT Distributor Program

          This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

            This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.