Be A Dusun Distributor >>

Dual-band 4G router with gateway Product Specification

Table of Contents

Wi-Fi Repeater / Wi-Fi Adapter
Wi-Fi Extender

Provides high spend wifi to previously no signal zone in your home

4g lte product spec pro

1. Introduction

1.1 Purpose& Description

DSGW-021 wireless router complies with the latest IEEE 802.11ac Wi-Fi standard and LTE 4G function. It offers continual high-speed data transmission for multiple devices at the same time.

Built-in 600MHz processor provides powerful data handling capacity to improve wireless transfer efficiency. Meanwhile, a simultaneous dual-band with a middle power design on both bands makes the wireless connection more flexible and stable, especially over long distances. Generally, DSGW-021 is designed for medium-size homes with increasing demand for high-speed Wi-Fi. At the same time, it can be used as a control center for smart homes and can connect to Zigbee, z-wave, and Bluetooth devices at the same time.

1.2 Product Feature Summary
  • Cutting-edge 4G network – share internet access with up to 64 Wi-Fi devices and enjoy download speeds of up to 150 Mbps.
  • AC1200 Wi-Fi – creates simultaneous dual-band Wi-Fi networks, with maximum speeds of up to 300 Mbps on the 2.4 GHz band and 867 Mbps on the 5 GHz band.
  • Plug a SIM card and play – no configurations needed, compatibility for SIM cards in 100+ countries is assured by years of field testing.
  • Two detachable advanced LTE antennas – enjoy stable and efficient connections to every device thanks to the two external antennas.
  • Wi-Fi router mode – plug an Ethernet cable into the LAN/WAN port for flexible access as a backup option if you can’t get a 4G connection.
  • Support ZigBee3.0, Z-WAVE, Bluetooth wireless protocol.

2. Mechanical Requirement

2.1 Drawings
4g lte product spec pro

3. Electrical Requirements

3.1 Hardware Information
Power Supply PortSupport DC Input, input Voltage range is 4.5V to 5V. The power seat aperture is 3.5mm. The needle diameter is1.35 mm and is positive. Power adapter: 100-240V 50/60HZ, Output is 5V/2A.
Reset buttonAfter pressing the reset button for more than 5 seconds, the Wi-Fi unit will be restored to the factory settings.
Network Interface4 10/100Mbps LAN Ports, 1 10/100Mbps LAN/WAN Port, 1 Micro SIM Card Slot
Indicator LEDs1).Power LED normally on when powered on
2).Network LED normally on when connected
3).Wi-Fi LED normally on after connecting to Wi-Fi for 1-2 secs.
AntennaInternal 4G LTE Antenna , 3 * 2.4G FPC antenna
Operating Temperature-10℃~70℃
Currents[email protected]

3.2 Performance Requirement

3.2.1 Wireless Feature
Zigbee Performance
  • TX Power: 17.5dBm
  • Range: 100 meters minimum, open filed
  • Receiving Sensibility:-94dBm
  • Frequency offset: +/-20KHZ
  • Frequency offset: +/-20KHZ
  • Low Frequency (MHz):2400
  • High Frequency (MHz):2483.5
  • E.i.r.p (Equivalent Isotopically Radiated power) (mW)<100mW
  • Bandwidth (MHz):5MHz
  • Modulation: OQPSK
Bluetooth Performance
  • TX Power: 19.5dBm
  • Bluetooth: 19.5dBm
  • Range: 150 meters minimum, open filed
  • Receiving Sensibility: [email protected]%BER
  • Frequency offset: +/-20KHZ
  • Frequency Range (MHz):2401.0~2483.5
  • Low Frequency (MHz):2400
  • High Frequency (MHz):2483.5
  • E.i.r.p (Equivalent Isotopically Radiated power) (mW)<10mW
  • Bandwidth (MHz):2MHz
  • Modulation: GFSK
Cellular network 4G FDD-LTE B1/B3/B7/B8/B20 (2100/1800/2600/900/800MHz)
TDD-LTE B38/B39/B40/B41 (2600/1900/2300/2500MHz)
3G: DC-HSPA+/HSPA+/HSPA/UMTS B1/B8 (2100/900MHz)
Z-wave Performanc
  • TX power up to13dBm (20mW)
  • RX sensitivity: @100kbps-97.5dBm
  • Range: 100 meters minimum, open filed
  • Default Frequency: 916MHz( Different country with different frequency)
  • Pls check the z-wave frequency band table
3.2.2 Software feature
Quality of Service Prioritises network traffic by device or application
Operating Modes 3G/4G Router, Wireless Router
WAN Type Dynamic IP/Static IP/PPPoE/PPTP(Dual Access)/L2TP(Dual Access)
Management Access Control, Local Management, Remote Management reboot schedule
DHCP Server, Client, DHCP Client List, Address Reservation
Port Forwarding Virtual Server, Port Triggering, UPnP, DMZ
Dynamic DNS DynDns, NO-IP
Access Control Parental Control, Local Management Control
Firewall Security DoS, SPI Firewall, IP Address Filter/Domain Filter, IP and MAC Address Binding
Protocols Supports IPv4 and IPv6
Guest Network 2.4GHz guest network x 1, 5GHz guest network x 1
IPSec VPN Supports up to 10 IPSec VPN tunnels
3.2.3 Other
Certification CE, FCC, RoHS
Environment Operating Temperature: 0℃~40℃ (32℉ ~104℉)
Storage Temperature: -40℃~70℃ (-40℉ ~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

4. Application

Know more about our Network Devices

Looking For An IoT Device Supplier For Your Projects?


    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.