Smart Switch

Product Specification

Product Name: Smart Switch

Model Name: DSW-010

Model Name: DSW-011

Model Name: DSW-012

DSW-010

DSW-011

DSW-012

Model list

Wi-Fi 2.4G

DSW-010-3

1. Introduction

1.1 Purpose& Description

The intelligent wall switch is a smart switch , by which the user can remotely control the opening and

closing of the switch, which has the advantages of the simple operation, high stability, strong anti-interference ability, and low power loss. After the interior is arranged, the status of all the lights in the room will be displayed on each switch.

1.2 Product Feature Summary

• Easy to Install

• High reliability

• Supporting timing control: Set the time to automatically on/off

2. Mechanical Requirement

2.1 Drawings

2.2 Exploded drawing

3. Specifications

Wireless Protocol

Wi-Fi or zigbee3.0 or Bluetooth

Socket class

GB/T 2099.1,GB/T 1002 15092.1-2010

​Certification

CE/FCC

Bluetooth-Performance

• TX Power: 19.5dBm

• Bluetooth: 19.5dBm

• Range: 150 meters minimum, open filed

• Receiving Sensibility: -80dBm@0.1%BER

• Frequency offset: +/-20KHZ

• Frequency Range (MHz):2401.0~2483.5

• Low Frequency (MHz):2400

• High Frequency (MHz):2483.5

• E.i.r.p (Equivalent Isotopically Radiated power) (mW)<10mW

• Bandwidth (MHz):2MHz

• Modulation: GFSK

Technical Specification

Operation temperature

Operation humidity

Housing material

Switch class

-10~ +50°C

​5%-95%RH

(V0 grade flame retardant PC)

GB/T 15092.1

Wi-Fi Performance

• IEEE wireless LAN standard:

        IEEE802.11n; IEEE802.11g; IEEE 802.11b

• Data Rate:       

        IEEE 802.11b Standard Mode:1,2,5.5,11Mbps

        IEEE 802.11g Standard Mode:6,9,12,18,24,36,48,54 Mbps

        IEEE 802.11n: MCS0~MCS7 @ HT20/ 2.4GHz band

        MCS0~MCS7 @ HT40/ 2.4GHz band

• Sensitivity:

        IEEE 802.11n: 16dBm @HT20/40 MCS7 /2.4GHz band

        IEEE 802.11g: 16dBm @54MHz

        IEEE 802.11b: 18dBm @11MHz

• Wireless Security: WPA/WPA2, WEP, TKIP, and AES

• Working mode : Bridge、Gateway、AP Client

• Range: 50 meters minimum, open field

• Transmit Power:17dBm

• Highest Transmission Rate: 300Mbps

• Frequency offset: +/- 50KHZ

• Frequency Range (MHz): 2412.0~2483.5

• Low Frequency (MHz):2400

Zigbee Performance

• TX Power: 17.5dBm

• Range: 100 meters minimum, open filed

• Receiving Sensibility:-94dBm

• Frequency offset: +/-20KHZ

• Frequency Range (MHz):2401.0~2483.5

• Low Frequency (MHz):2400

• High Frequency (MHz):2483.5

• E.i.r.p (Equivalent Isotopically Radiated power) (mW)<100mW

• Bandwidth (MHz):5MHz

• Modulation: OQPSK

Flashing: The device enters the search network status

Indicator light status

description

Slow flash: Device networking

Constantly bright: The device is connected to the network and lights up

4. Installation

4.1 Installation method

• Use the tool to open the button/panel.

• Strip the wire insulation layer about 10-12 mm.

• Insert the wire into the hole of the base post and make sure it is inserted all the way, then tighten the wire

with a flat or Phillips screwdriver to complete the connection.

• Use a fixed screwdriver to tighten the mounting bracket to the cassette, then press the button to complete

the installation.

• This product should be installed and commissioned by qualified professionals in accordance with the

electrical specifications and product specifications.

4.2 Installation wiring diagram

4.3 Device networking

Network access: button reset button for 5 times(within 4 seconds), the flashing device enters the distribution

mode, the indicator flashes for 40 seconds and then goes out. After 40 seconds, the indicator is off and the

device is successfully connected to the network.

Exit the net: The button reset button is pressed 5 times (within 4 seconds) to enter the exit mode.

* The pairing operation between gateway and smart system must refer to the gateway manual.